Features:
*New high-tech product integrating mechanical and photoelectrical technologies
*Equipped with a digital microscope, direct display of the measuring method, test force, indentation length, hardness value, dwell time of test force
*Camera device can be connected via RS232 interface
*Especially suitable for testing the hardness of micro and thin specimen, fragile material
*Optional Knoop indenter can be used to measure Knoop hardness value
*By means of closed-circuit system for control, CPU control testing force to load, dwell and unload, the sensor feedback information, therefore the lost of the testing force can be automatically compensated during testing for high accuracy *HVS-30P can print out testing results through built-in printer
*HVS-30Z equipped with auto turret for anti-maloperation and built-in printer
Specifications:
|
Test Forces |
N |
4.903, 9.807, 19.61,24.52, 29.42, 49.03,98.07, 196.1, 294.2 |
|
KGF |
0.5, 1, 2, 2.5, 3, 5,10, 20, 30 |
|
Carriage control |
Automatic (loading/dwell /unloading) |
|
Dwell time |
(0~60) s |
|
Amplification of the microscope |
100×, 400× |
|
Min. graduation value of the test drum wheel |
0.0625um |
|
Testing field |
1HV~2967HV |
|
Max. Height of the specimen |
170mm |
|
Max. Width specimen of the specimen |
130mm |
|
Light source |
Cold light source |
|
Power |
110V/220V, 60/50HZ |
|
Dimensions (mm) |
535×225×580 |
Standard configurations:
Large test table 1
"V" shape test table 1
Screw drivers 2
Horizontal regulation screws 4
Level 1
Power cord 1
10×digital microscope 1
Vickers hardness blocks 2
Repair fuses (1A) 2
Instruction manual 1
TIMES certificate 1
Optional Accessory
LCD device
Knoop indenter |
