Vickers Hardness Testers
HV-1000Z Digital Micro Hardness Tester
*New high-tech product integrating mechanical and photoelectrical technologies
*Equipped with a digital microscope, direct display of the measuring method, test force, indentation length, hardness value,dwell time of test force
*Camera device can be connected via RS232 interface
*Especially suitable for testing the hardness of micro and thin specimen, fragile material
*By means of a 10objective and a 40objective, the tester has wide measurement and high accuracy
*Optional Knoop indenter can be used to measure Knoop hardness value
* Equipped with auto turret for anti-maloperation
Test Forces
(0.098, 0.246, 0.49, 0.98, 1.96, 2.94, 4.90, 9.80) N(10, 25, 50, 100, 200, 300, 500, 1000) gf
Carriage Control
loading / dwell / unloading (automatic)
Amplification of the Microscope
100, 400
Dwell Time of the Test Force
(5-60) s
Min. Graduation Value of the Testing Drum Wheel
Testing Field
Dimension of the XY Table
100100 mm
Movement Field of the XY Table
Max. height of the specimen
Max. width of the specimen
Light source
cold light source
Power supply
110V/220V, 60/50Hz
Dimensions (mm)
Standard configurations:
Main unit   1
Weights   6
Cross testing table   1
Platelet fixture   1
Plane-holding fixture   1
Filament fixture   1
Screw driver   2
Horizontal regulation screws   4
Level   1
Power cord  1
10numerical microscope  1
Vickers hardness blocks   2
Repair fuses (1A)   2
Weight shaft   1
Instruction manual   1
TIMES certificate   1
Warranty card   1

Optional Accessory
Knoop Indenter
Hardness Test Blocks
Metallurgical Specimen Cutter
Metallurgical Specimen Mounting Press
Metallurgical Specimen Polisher
CCD Image Measuring System
Beijing TIME Haofang Technology Co., Ltd. All Rights Reserved
Tel: +86-10-62915841 Fax: +86-10-61199378 ICP11029437-2 Sign in