Features:
*New high-tech product integrating mechanical and photoelectrical technologies
*Equipped with a digital microscope, direct display of the measuring method, test force, indentation length, hardness value,dwell time of test force
*Camera device can be connected via RS232 interface
*Especially suitable for testing the hardness of micro and thin specimen, fragile material
*By means of a 10x objective and a 40x objective, the tester has wide measurement and high accuracy
*Optional Knoop indenter can be used to measure Knoop hardness value
*Print out testing results through built-in printer
Specifications:
|
Test Forces |
(0.098, 0.246, 0.49, 0.98, 1.96, 2.94, 4.90, 9.80) N(10, 25, 50, 100, 200, 300, 500, 1000) gf |
|
Carriage Control |
loading /dwell / unloading (automatic) |
|
Amplification of the Microscope |
100×, 400× |
|
Dwell Time of the Test Force |
(5-60) s |
|
Min. Graduation Value of the Testing Drum Wheel |
0.0625um |
|
Testing Field |
1HV-2967HV |
|
Dimension of the XY Table |
100×100 mm |
|
Movement Field of the XY Table |
25×25mm |
|
Max. height of the specimen |
70mm |
|
Max. width of the specimen |
95mm |
|
Light source |
cold light source |
|
Power supply |
110V/220V, 60/50Hz |
|
Dimensions (mm) |
425×245×490 |
Standard configurations:
main unit 1
Weights 6
Cross testing table 1
Platelet fixture 1
Plane-holding fixture 1
Filament fixture 1
Screw drivers 2
Horizontal regulation screws 4
Level 1
Power cord 1
10×numerical microscope 1
Vickers hardness blocks 2
Repair fuses (1A) 2
Weight shaft 1
Instruction manual 1
TIMEs certificate 1
Warranty card 1
Optional Accessory
Knoop indenter
Grinding machine
Mosaic machine
LCD device
Cutting machine |
